Filter
Top Products
-26-
maintenance
How to Maintain the EVO 2CD
Treadmill:
Proper maintenance is very important
to ensure your treadmill is always in top
working condition. Improper
maintenance could cause damage or
shorten the life of your treadmill and
exceed the LIMITED WARRANTY
coverage.
IMPORTANT: Never use abrasives or
solvents to clean the treadmill. To
prevent damage to the computer, keep
liquids away and keep it out of direct
sunlight.
Inspect and tighten all parts of the
treadmill regularly. Replace any worn
parts immediately.
BELT ADJUSTMENT:
The running belt has been adjusted properly
by the factory. However transportation,
uneven flooring or other unpredicted
reasons could cause the belt to shift off
center resulting in the belt rubbing with the
plastic side rail or end caps and possibly
causing damage. To adjust the belt back to
it’s proper position please follow the
directions below:
1. If your belt tends to walk to the right,
rotate the right tension bolt clockwise. We
recommend adjustments of 1/4 turn at a
time, and follow with a test. If your belt
continues to walk to the right, simply adjust
the left belt tension bolt by turning it 1/4 turn
counterclockwise, follow with a test.
2. If your belt tends to walk to the left, rotate
the left tension bolt clockwise 1/4 turn at a
time, and follow with a test. If the belt
continues to walk to the left, simply adjust
the right tension bolt counterclockwise.
3. If your belt appears to be loose, simply
tighten both bolts evenly 1/4 turn. If it
appears tight, simply loosen both bolts
evenly 1/4 turn.
IMPORTANT STEPS
Tension bolts for belt adjustment
BELT ADJUSTMENT