-17-
roll away instructions
How to roll away the EVO 2CD Treadmill:
Tilt the treadmill to one side (you may need the
help of a friend), reach under the Base Frame
(1) and pull down the Caster Bracket (49).
Repeat this procedure on the other side. Walk
around to the back of the treadmill, lift the deck
and roll to desired location as shown below.
NOTE: After moving, make sure to put the Caster
Brackets (49) back into their upright position in
order to stabilize the treadmill for use.
ROLL AWAY FOR STORAGE
Put up to stabilize for use.
Pull down to roll away.