Filter
Top Products
24 SMOOTH CE3.6 ELLIPTICAL
ASSEMBLY
STEP 10:
First make sure to connect the 7pin Computer Wire – Upper (107) with 7pin
Computer Wire – Middle (204) and Hand Pulse Sensor Wire – Upper (106)
with Hand Pulse Sensor Wire – Middle (205) as shown below.
(A) Attach the Computer to the Console Support Upright (201) using four M6 x
20mm Bolts (105).
(B) Attach the Console Back Cover (119) to the Console and secure using four
4x19mm Screws (726)
NOTE: Make sure all wires are recessed into the Console Housing, do not trap
or pinch any of the wires.
726
X2
726
119
201
751
106
106
205
205
107
204