Filter
Top Products
TREADBELT TRACKING ADJUSTMENT:
The performance of your treadmill is dependent on the frame running on a reasonably
level surface. If the frame is not level, the front and back roller cannot run parallel, and
constant belt adjustment may be necessary.
The treadmill is designed to keep the treadbelt reasonably centered while in use. It is
normal for some belts to vary near a side while the belt is running with no one on it.
After a few minutes of use, the treadbelt should have a tendency to center itself. If,
during use, the belt continues to move toward one side, adjustments are necessary.
TO SET TREADBELT TRACKING:
A 1/4” allen wrench is provided to adjust the rear roller. Make tracking adjustments
from the left side only. Set belt speed at approximately 2 to 3 mph. A small adjustment
can make a dramatic difference. Turn the bolt only a 1/4 turn and wait a few minutes for
the belt to adjust itself. Continue to make 1/4 turns until the belt stabilizes in the center
of the running deck.
The belt may require periodic tracking adjustment depending on use and walking/
running characteristics. Some users will affect tracking differently. Expect to make
adjustments as required to center the treadbelt. Adjustments will become less of a
maintenance concern as the belt is used. Proper belt tracking is an owner responsibil-
ity common with all treadmills.
CAUTION - KEEP HANDS CLEAR OF MOVING REAR PULLEY!
Belt will move in direction of allen wrench.
ATTENTION:
DAMAGE TO THE RUNNING BELT RESULTING FROM IMPROPER TRACKING /
TENSION ADJUSTMENTS IS NOT COVERED UNDER THE SPIRIT WARRANTY.
LUBRICATION:
Do not relube with other than Smooth lubricant. See your Smooth dealer for purchase.
The use of some other lubricants may destroy the deck surface or belt and will void
warranty. If the treadmill belt/deck is kept reasonably clean it is possible to expect over
1000 hours before relubing is necessary.
17