Filter
Top Products
LED 17 COMPUTER INSTRUCTIONS
3
COMPUTER OPERATION
ENGLISH/METRIC CONVERSION:
The treadmill computer display can show ENGLISH and METRIC information. The factory should have the proper setting on
this for different markets. In case that the treadmill needs to be converted between METRIC and ENGLISH readout, please
follow the procedure as below:
1. Set the POWER SWITCH to ON. Press the START button on the computer and hold it. Insert the SAFETY KEY
then release the START button. The computer will sound one short beep and METRIC LED light up.
2. Press the START button to switch between METRIC/ENGLISH and press the STOP button to confirm the selection
and return to the POWER ON status.
QUICK START:
When the treadmill is in POWER ON status, press the START button to activate the QUICK START program. The speed will
start from 0.5MPH/0.8KMPH. Press the SPEED UP/DOWN button to change the speed. Press the INCLINE switch to
elevate the treadmill. The TIME, CALORIES and DISTANCE will count up from 0.
PROGRAM:
To select other programs, you will need to select the USER first. The computer display would show the USER CODE after
you press any pre-set program button.
The computer will display the factory default setting:
CALORIES window will display the default user 1 weight: 68KG/150LB
TIME window will display the default user 1 height: 170CM/67”
SPEED window will display the default user 1 code: U1
INCLINE window will display the default user 1 age: 35
HEART RATE window will display the default user 1 pulse: 157
If the user 1 information has been changed and saved, then the POWER ON status will show the last saved user 1
information instead of the factory default setting.
Press the INCLINE UP/DOWN button to select the USER CODE from U1 to U9 then press the ENTER button to confirm the
user code. If the user information has been previously input, press the ENTER button again and hold it for 5 seconds then
the computer will skip the user information set up procedure. To input the new user information, please follow the procedure
as below:
WEIGHT set up – After the User Code confirmation procedure, The CALORIES/CAL PER HOUR display will show the default
or previous setting and begin blinking. Press the INCLINE UP/DOWN button to adjust the user weight information then press
ENTER to confirm.
HEIGHT set up – After the WEIGHT set up procedure, the TIME/DISTANCE display will show the default or previous setting
and begin blinking. Press the INCLINE UP/DOWN button to adjust the user height information then press ENTER to confirm.
AGE set up – After the HEIGHT set up procedure, the INCLINE/LEVEL display will show the default or previous setting and
begin blinking. Press the INCLINE UP/DOWN button to adjust the user age information then press ENTER to confirm.
GOAL COURSE TIME:
When the computer is in POWER ON status press the
button on the console. The LED on button will light up. Then
you have to select the user code. After completed the user profile setup, the TIME LED will light up and show the preset time
as 30:00 and blank. Press the INCLINE UP/DOWN buttons to set your ideal workout time then press the ENTER button to
confirm. Then press the START button to start. After pressing the START button the TIME counts down from the preset time.
The other information counts up until the treadmill stops. The Speed starts from 2MPH/3.2KMPH and the incline starts from
level 0. Press the SPEED UP/DOWN buttons to adjust the speed. Press the INCLINE UP/DOWN buttons to adjust the
incline level.
During exercise press STOP to pause the program. Speed and Incline Level return to the beginning levels while
the other information (Time, Distance, Calories) is paused. To recall values and resume exercising press START. Pressing
the STOP button again within 30 seconds returns all data to zero and the computer returns to POWER ON status. If no
buttons are pressed within 30 seconds the computer automatically returns to POWER ON status and all data returns to zero.