Filter
Top Products
assembly instructions
-7-
Step 2:
Cap the Front Stabilizer (202) with two
50 Sq End Caps (216).
Attach the Front Stabilizer (202) to the
Leg Press Main Frame (201) using two
1/2" x 3" Hex Head Bolts (226), four 1/2"
Washers (234) and two 1/2" Nylon Nuts
(236).
Cap the Leg Press Main Frame (201)
with one 50 Sq End Cap (216). Insert
the two 50 mm Sq Bushings (217) into
the Leg Press Main Frame (201). Insert
two 3/4" Steel Bushings (224) into the
sleeve on the Leg Press Main Frame
(201).
Attach the Leg Press Main Frame (201)
to the Rear Connect Frame (203) and
to the Front Connect Frame (204) using
four 3/8" x 3" Hex Head Bolts (228),
eight 3/8" Washers (235) and four 3/8"
Nylon Nuts (237).
ASSEMBLY
217
216
236
234
224
216
202
216
234
226
224
201
228
235
235
237
235
237
203
204
235
235