Filter
Top Products
Step 5:
Cap the Foot Plate Connector (210)
with one 50 Sq End Plug (220). Insert
the four 3/4" Steel Bushings (224) into
the holes in the Foot Plate Connector
(210).
Attach the Foot Plate Connector (210)
to the Front Leg Press Support (207)
and the Rear Leg Press Support (208)
using two Axles (225), four 1/2" Washers
(234) and four 1/2" Nylon Nuts (236).
Cap the Foot Plate (209) with two 45 x
75 Rect End Plugs (219). Attach the
Foot Plate (209) to the Foot Plate
Connector (210) using two 1/2" Nylon
Nuts (236) and two 1/2" Washers (234).
Firmly tighten all bolts at this time.
Cap the 1/2" Nuts (236) on each side
of the three Axles (225) using six Caps
For 1/2" Nuts (221).
ASSEMBLY
assembly instructions
-10-
208
207
225
236
221
236
234
234
221
219
219
209
210
224
224
234
234
236
236
220
221
221