Filter
Top Products
1. Using the provided USB cable, plug
the one end of the cable into the
camera's USB port and the other end
into your PC's USB port.
2.
If using Windows 98SE or lower,
drivers must be installed on your PC.
See the included CD-Rom.
If using Windows 98ME or higher,
CaptureView automatically installs on
your PC. No drivers are needed.
3. After setup is complete, using
Windows Explorer, you can browse
the camera's memory as if it were a
hard drive.
4. If CaptureView does not appear in
Windows Explorer, it might be using a
drive letter that has already been
assigned by your PC (e.g., C:, D:, E:,
etc.). Use Windows' Disk Manager
program to change the drive letter to
an unassigned letter (e.g., K:).
5 You may now copy images or files
from the camera's memory to your
PC just as you would with any
external hard drive or flash memory.
Download Pictures (continued)
If you want to... Do this...
Note: See “Troubleshooting,”
page 28, for more information
about connecting CaptureView to
your PC.
Note: If you are using a Mac OS
9.0 or higher, drag the memory
card icon to the trash before
disconnecting the USB cable.
Operations
25