Filter
Top Products
7
HOW TO OPERATE THE ELECTRONIC MONITOR
1. To turn on the power, press the on/reset button or
simply begin pedaling. When the power is turned
on, the entire display will appear for two seconds.
The electronic monitor will then be ready for
operation.
2. Select one of the five modes:
Scan modeÑWhen the power is turned on, the
scan mode will automatically be selected. One
mode arrow
will show that
the scan mode
is selected,
and a flashing
mode arrow
will show
which mode is
currently
displayed. Note: If a different mode is selected, you
can select the scan mode again by repeatedly
pressing the mode button.
Speed, time, distance or calorie modeÑTo select
one of these modes for continuous display, press
the mode
button
repeatedly.
The mode
arrows will
show which
mode is
selected.
(Make sure
that the scan mode is not selected.)
3. To reset the display, press the on/reset button.
4. To turn off the power, simply wait for about four
minutes. Note: The monitor has an Òauto-offÓ
feature. If the pedals are not moved and the
monitor buttons are not pressed for four
minutes, the power will turn off automatically
in order to conserve the batteries.