Filter
Top Products
5
3
4
3
28
51
45
45
1
3. Slide the Seat Carriage (4) onto the other end of the
Seat Frame (3). Make sure that the Seat Carriage is
oriented as shown. Insert the end of the Seat Frame
into the Frame (1), and attach it with two M10 x 75mm
Button Bolts (51) and two M10 Black Split Washers (45).
Insert the Seat Knob (28) into the welded nut (not
shown) on the right side of the Seat Carriage (4) and
into one of the adjustment holes in the right side of the
Seat Frame (3). Tighten the Seat Knob into the welded
nut.
4. Slide a Handlebar (7) onto one side of the Seat
Carriage (4). Attach the Handlebar with two M6 x
34mm Button Screws (52) and two M6 Nylon Locknuts
(53).
Attach the other Handlebar (7) to the Seat Carriage (4)
in the same way.
4
53
52
7
7
4
2. Attach the indicated end of the Seat Frame (3) to the
Rear Stabilizer (9) with two M10 x 56mm Carriage
Bolts (49), two M10 Zinc Washers (62), and two M10
Zinc Nylon Locknuts (61).
61
62
3
9
2
62
49
5. Attach the Backrest Frame (5) to the Seat Carriage (4)
with an M8 x 45mm Button Screw (54) and an M8 Split
Washer (56) from the top, and two M8 x 37mm Button
Screws (55) and two M8 Split Washers (56) from the
bottom.
Next, attach the Backrest (10) to the Backrest Frame
(5) with four M6 x 16mm Button Screws (57).
5
10
5
57
55
56
4
54
56