Filter
Top Products
HOW TO USE THE EXERCISE CYCLE
• k ....
HOW TO ADJUST THE SEAT USING THE MULTI-POSITION HANDLEBARS
For effective
exercise, the
Seat (11) should
be at the proper
height. As you
pedal, there
should be a
slight bend in
your knees
when the pedals
are in the lowest
position. To
adjust the Seat,
first hold the
Seat and
remove the Seat Pin (35). Align one of the holes in
the Seat Post (10) with the hole in the Frame (1).
Insert the Seat Pin into the Frame and the Seat Post.
Caution: Make sure to insert the Seat Pin through
one of the holes in the Seat Post; do not Insert the
Seat Pin under the Seat Post.
HOW TO ADJUST THE PEDALING RESISTANCE
To vary the
intensity of your
exercise, the
pedaling resis- 25
tanca can be
adjusted. The
resistance is
controlled with
the Resistance
Knob (25). To
increase the
resistance, tum
the Resistance Knob clockwise; to decrease the resis-
tance, turn the Resistance Knob counterclockwise.
BA'rrERY INSTALLATION
Before the console can be operated, two ""AA" bat-
tedes must be installed. If you have not installed bat-
tedes, see assembly step 4 on page 5.
Your exercise
cycle features
padded, multiple-
position handle-
bars. They are
designed to offer
a maximum
amount of cam-
fort while exer-
cising.
DESCRIPTION OF THE CONSOLE
The console features
five modes that pro-
vide instant exercise
feedback during your
workouts. The modes
are described below.
• Speed---Displays
your pedaling
speed, in miles per
hour.
• Time--Displays the
elapsed time. Note:
If you stop pedaling
for ten seconds or
longer, the time
mode will pause
until you resume.
Display
SPEED J TIME
ff,c,c c,o,l
II'L r - .LT'll
T --U
DIST. C_I.. SCAN
Mode Indic,atom
MODE ON/RESET
• Distance--Displays the total distance you have ped-
aled, in miles.
• Calode---Displays the approximate number of calo-
ries you have burned.
• Scan--Displays the speed, time, distance, and calo-
rie modes, for 5 seconds each, in a repeating cycle.
6