Filter
Top Products
MAINTENANCE AND TROUBLE-SHOOTING
Inspect and tighten all parts ofthe CARDIO FIT PLUS regularly. Keep the monitor out of direct sunlightor the
display may be damaged. The CARDIO FIT PLUS can be cleaned with a soft, damp cloth. Keep liquidaway from
the monitor. When storing the CARDIO FIT PLUS. remove the batteriesfrom the monitor,
HOW TO REPLACE THE BATrERIES
Ifthe display of the Monitor (1) becomes dim, the two L1154
watch batteries should be replaced. Lift the Monitoroffthe
Frame (6): Disconnect the Sensor Wire (15) from the
Monitor. Remove the four screwsfrom the back coverof the
Monitor and remove the back cover (see the inset drawing).
Push the two old batteries out ofthe battery clips, noting
whichway each battery isturned. Insert two new batteries.
Screws
Reattach the back cover of the Monitor (1). Connect the
Sensor Wire (15) to the Monitor. Insert all excess wire into
the Frame (6). Press the Monitoronto the Frame.
HOW TO ADJUSTTHE MAGNET AND REED SWITCH
"If the monitordisplays incorl'eCtfeedback, the Magnet (27)
and the Reed Switch (15) shouk:lbe checked. Pivot the Pedal
Frame (32) until the Magnet isaligned with the Reed Switch.
Slightlyloosen the #8 x 3/4" Screw (18) inthe Reed Switch.
Slide the Reed Switch slightlycloserto the Magnet. Tighten
the #8 x 3/4" Screw. Exercise on the CARDIO FIT PLUS for a
moment. Repeat uhtilthe monitordisplays correct feedback.
Make sure that the Magnet does not hit the Reed Switch.
HOW TO LUBRICATE THE CARDIO FIT PLUS
Everythree months, a small amountof light multi-purpose oil
should be applied to the CARDIO FIT PLUS. Apply a few
drops of oil between the dome capsand the frame inthe
locationsshown at the right. Make sure to apply oilto both
sides of the CARDIO FIT PLUS.
Apply Oil
8