Filter
Top Products
rate. When both of these situations occur, then the console will perform the
Recovery Test.
The console will show “01:00 STOP” and the time will begin to count down.
Stop exercising but continue to grip the heart rate sensors. After 5 seconds,
the display will show “00:55 RELAX” and will continue to count down to
00:00. For the entire minute the console will also show your heart rate. You
must grip the heart rate sensors for the duration of the test.
The display will continue to show “RELAX” and your heart rate until the clock
counts down to 00:00. The console will then calculate your recovery score.
Recovery Score = Your heart rate at 1:00 (the beginning of the test) minus
your heart rate at 00:00 (the end of the test).
The display will show “SCORE (Recovery Score)”. This will remain on the
display for 5 seconds; then you can press RESULTS to view a summary of
your workout and end the program you are working out in, or press START
to resume working out where you left off.
The higher the Recovery Test score value, the quicker your heart rate is returning
to a more restful state and is an indication of improving fitness. By recording
these values over time you can see the trend toward better health!
When you press the RECOVERY button and there is no heart rate signal
or display, the console will show “NEED HR” and the HEART RATE ICON
on the display will blink. This message will show for 5 seconds, then the
Program will resume. You must see your heart rate on the display and then
you must push the RECOVERY button again to perform the test.
Helpful Tip: For a more relevant score, try to obtain a steady heart rate for
3 minutes before pressing the RECOVERY button. This will be easier to
achieve, and obtain the best result, in the Quick Start or Manual program so
you can control level of resistance.
***Please note: The RECOVERY
button does not function when you are in
the BMI program.
Results Mode
When you complete a program, the Results Mode will automatically display
and show your basic workout statistics. Manually pressing this button during
your workout will also end the program and then give you your basic workout
statistics. You cannot return to your workout after pressing this button.
To have the option of either ending your workout and seeing your workout
results, or pausing your workout so you can return to where you left off, per-
form the following steps:
To STOP or PAUSE the program:
Press the START / PAUSE button to
OPERATION
18