Filter
Top Products
See the drawings below to identify small parts used in assembly. The number in parentheses by each drawing is
the key number of the part, from the PART LIST near the end of this manual. Important: Some small parts
may have been preattached. If a part is not in the hardware kit, check to see if it has been preattached.
M6 Washer (21)
M10 Nylon Locknut (19)
M8 Nylon Locknut (24)
M8 Washer (20)
M8 x 63mm Bolt (16)
M8 x 80mm Screw (13)
M8 x 38mm Bolt (18)
M10 x 190mm Bolt (14)
M6 x 35mm Screw (15)
M4 x 12mm Self-tapping Screw (17)
PART IDENTIFICATION CHART
5