Filter
Top Products
22
The console features an information mode that keeps
track of the total number of hours that the treadmill has
been operated and the total number of miles that the
walking belt has moved. The information mode also
allows you to switch the console from miles per hour to
kilometers per hour. In addition, the information mode
allows you to turn on and turn off the demo mode.
To select the information mode, hold down the STOP
button while inserting the key into the console. When
the information mode is selected, the following informa-
tion will be shown:
The SPEED/PACE display will
show an “E” for English miles
or an “M” for metric kilometers.
The unit of measurement can
be changed by pressing the
SPEED + button.
The TIME display will show the
total number of hours that the
treadmill has been used.
The DISTANCE/LAPS display
will show the total number of
miles that the walking belt has
moved.
IMPORTANT: Make sure that
there is not a “d” in the
CALS/FAT CALS display. If a
“d” appears in the display, the
console is in the “demo” mode.
This mode is intended to be
used only when a treadmill is displayed in a store.
When the console is in the demo mode, the power cord
can be plugged in, the key can be removed from the
console, and the displays and indicators on the console
will automatically light in a preset sequence, although
the buttons on the console will not operate. If a “d” ap-
pears in the CALS/FAT CALS display when the in-
formation mode is selected, press the SPEED – but-
ton so the display is blank.
To exit the information mode, remove the key from the
console.
THE INFORMATION MODE/DEMO MODE