Filter
Top Products
7. Identify the Left Pedal (40). The Pedals are marked
with an ÒLÓ for ÒleftÓ or an ÒRÓ for ÒrightÓ on the ends
of the threaded shafts. Using an adjustable wrench,
tighten the Left Pedal counterclockwise into the left
Crank Arm (34).
Tighten the Right Pedal (not shown) clockwise into
the right Crank Arm (34). Tighten both Pedals as
fully as possible.
Important: After using the exercise cycle for one
week, retighten the pedals. For best performance,
the pedals must be kept properly tightened.
7
34
40
7
8. Make sure that all parts are properly tightened before you use the exercise cycle. Note: Some hard-
ware may be left over after assembly is completed. Place a mat under the exercise cycle to protect the
floor or carpet.