Filter
Top Products
9
4. Identify the Left and Right Base Covers (73, 74),
which are marked either “Left” and “Right” or “L”
and “R.” Slide the Left and Right Base Covers
onto the Left and Right Uprights (75, 76) as
shown.
Remove the wire tie from the Upright Wire (70).
74
76
75
70
Wire
Tie
73
4
5. Identify the left handrail assembly (A), which
is marked “Left.” If there is a wire in the left
Handrail (71), remove and discard it.
Hold the left handrail assembly (A) near the Left
Upright (75). Insert the wire tie on the Upright
Wire (70) into the bottom and out of the end of
the left Handrail (71) as shown. Then, pull the
Upright Wire through the left Handrail.
Attach the left handrail assembly (A) to the Left
Upright (75) with two 5/16" x 2 3/4" Screws (10)
and two 5/16" Star Washers (8). Make sure not
to pinch the Upright Wire (70). Do not tighten
the Screws yet.
Remove and discard the two indicated screws
(B) from the left Handrail (71).
Attach the right handrail assembly to the
Right Upright (not shown) as described
above. Note: There are no wires in the Right
Upright.
10
8
A
75
Wire
Tie
70
5
B
71