Filter
Top Products
9. Firmly tighten the four M8 x 31mm Button Screws
(80) in the Seat Carriage (11).
Pull the seat knob and slide the Seat Carriage (11)
to the desired position. Release the seat knob and
slide the Seat Carriage back and forth slightly
until it locks into position.
7
10. Identify the Right Pedal (37), which is marked with
an “R.” Using an adjustable wrench, tighten the
Right Pedal
clockwise
into the Right Crank Arm (65).
Tighten the Left Pedal
counterclockwise
into the Left
Crank Arm (not shown).
Adjust the Right Pedal Strap (38) to the desired
position, and press the end of the Pedal Strap onto
the tab on the Right Pedal (37). Adjust the Left
Pedal Strap (not shown) in the same way.
11
80
65 38
37
Tab
9
10
11. Make sure that all parts are tightened before you use the exercise cycle. Place a mat beneath the
exercise cycle to protect the floor.
Knob