Filter
Top Products
3
ASSEMBLY AND SET-UP
1 Using a 6mm hexagonal
key wrench, remove bolts
from handlebar clamp.
Note: Handlebar clamps are
located in the plastic bag.
2 Place handlebars in handle-
bar clamp and adjust angle
parallel to the fork.
3 Insert bolts and tighten
securely. When properly
tightened, the handlebars
should not move forward or
back.
Attaching the Handlebars
Need Help? Visit our web site for replacement parts, product support and a list of authorized service centers
at www.razor.com or call toll-free at 866-467-2967 Monday - Friday 8:00 AM - 5:00 PM Pacific Time.
1 Align fender with the hole
in the fork and insert the
bolt. TIghten securely using
a 10mm Wrench and 5mm
Allen Wrench.
q Attaching the Front Fender
1 Remove screw from front
fork. Align the number plate
with the hole in the fork and
tighten with a Philipscrew
driver.
q Attaching the Number Plate