Filter
Top Products
4
4 Locate the threaded hole
on the rear underside of frame.
Screw caster wheel into hole.
5 Tighten with 5mm hexagonal
wrench.
❑ Attaching the Rear Caster Wheels
1 Remove the four Allen socket
screws and Allen long screws
from the frame with two 5mm
hexagonal wrenches. One on top
and one on bottom.
2 Align four holes in seat with
four holes in frame. Insert Allen
long screws through the bottom of
the frame.
❑ Attaching the Seat
ASSEMBLY AND SET-UP
3 Secure with Allen socket
screws. Tighten screws with two
5mm hexagonal wrenches. One on
top and one on bottom.
2 Insert one small spacer between
wheel and caster and align holes.
Insert axle bolt through caster
, small
spacer, wheel and into small spacer
on other side of wheel.
Need Help? Visit our web site for replacement parts, product support, live chat and a list of
authorized service centers at www.razor.com or call toll-free at 866-467-2967 Monday - Friday
8
:00 AM - 5:00 PM Pacific Time.
3 Insert Allen socket screw
through caster, small spacer and
into axle bolt. Tighten with 5mm
hexagonal wrench on both sides.
1 Insert large spacer into wheel
and insert bearings into each side
of wheel. Make sure all holes are
aligned. Insert wheel into caster
.