Maintenance lnstructions
See the correct walking belt shown as below:
A.The
distance
between walking belt and board is within
15-20mm
--
Normal
Over 20mm
----
needed to be adjusted
Under
1smm
----
needed to
be adjusted
B.The speed for walking belt is 3MPH
,hold
on
the
handrail
,stand
on the side
rail
,one
foot on the belt but
without slipping
--
it's normal.
2.CLEANING:
Please clean the DECK
frame after
you
use the machine 3
months,
be sure
power
off and
take off the
plug
before
your
cleaning.
Warning! To
prevent
electrical shock,be sure the
power
to
the treadmill
is
OFF and
the
unit is unplugged
from the wall electrical
outlet
before attempting
any cleaning or mainteance.
After Each
Workout: Wipa off the console
and other treadmill surfaces with a
clean, water dampened soft cloth lo
r€move
excess
perspiration.
After
each
workout.
USE NO CHEMICALS
Weekly: Use of a treadmill mat
is
recommended
for ease of cleaning.
Vacuum
underneath treadmill
once a week.
Opening motor cover is forbidden commonly. lf
the
electricity
board or motor is
needed
to
be cleaned, call
qualified
service
personnel.
3.LUBRICATION:
It is recommended that
the
walking board be
checked
peridically
(around
3
months) for lubrication to ensure optimal treadmill
performance.
Using hex to lift the belt and
insertthe siliconeabout20
gram
to spraysmoothly
(adjust
belt without slipping
after lubrication).
4. Any olher servicing should be
performed
by an
authorized service
reDresentative.
17