Filter
Top Products
7
8. Hold the Rear Stabilizer (3) under the Carriage Bar
(7) in the position shown. Attach the Rear Stabilizer
to the Carriage Bar with three M8 x 100mm Button
Screws (63) and three M8 Washers (55).
8
7
63
63
55
55
3
9. Insert the lower end of the Backrest Frame (8) into
the Seat Frame (27). Attach the Seat Frame and the
Backrest Frame to the Seat Carriage (11) with four
M8 x 38mm Button Screws (24).
10. Slide a Seat Handle (61) onto one side of the
Backrest Frame (8). Attach the Seat Handle with
two M6 x 38mm Button Bolts (14) and two M6 Nylon
Locknuts (15).
Attach the other Seat Handle (not shown) to the
other side of the Backrest Frame (8).
9
8
24
24
27
11
61
8
15
14
10
55
12
27
29
11
11. Attach the Seat (12) to the Seat Frame (27) with
four M6 x 22mm Button Screws (29) and four M8
Washers (55).