ProForm 30464.0 Treadmill User Manual


 
17
HOW TO USE THE STEREO SOUND SYSTEM
T
o play music or audio books through the console’s
stereo speakers, you must connect your MP3 player,
C
D player, or other personal audio player to the con-
sole. Locate the audio wire below the display on the
console, and plug it into a jack on your MP3 player,
CD player, or other personal audio player.
Make sure
that the audio wire is fully plugged in.
Next, press the Play button on your MP3 player, CD
player, or other personal audio player. Then, adjust the
volume on your personal audio player.
If you are using a personal CD player and the CD
skips, set the CD player on the floor or another flat sur-
face instead of on the console.
THE INFORMATION MODE
T
he console features an information mode that keeps
track of treadmill usage information and allows you to
s
elect a unit of measurement for the console.
To select the information mode, insert the key into the
console while holding down the Stop button. When the
information mode is selected, the following information
will be shown:
An “E” (for English miles) or
an “M” (for metric kilometers)
will appear in the lower right
display. Press the Speed in-
crease button to change the
unit of measurement, if de-
sired.
The upper display will show the total number of hours
that the treadmill has been used.
The lower left display will show the total number of
miles or kilometers that the walking belt has moved.
Note: The console features a display demo mode, de-
signed to be used if the treadmill is displayed in a
store. While the demo mode is turned on, the console
will function normally when you plug in the power cord,
switch the circuit breaker to the reset position, and in-
sert the key into the console. However, when you re-
move the key, the displays will remain lit, although the
buttons will not function. If the demo mode is turned
on, a “d” will appear in the lower right display while the
information mode is selected. To turn on or turn off the
demo mode, press the Speed decrease button.
To exit the information mode, remove the key from the
console.