Filter
Top Products
17
Follow your progress with the LED track and
the four displays.
See step 5 on page 10.
Measure your pulse, if desired.
See step 6 on page 11.
When the program is finished, remove the
key.
Step onto the foot rails and remove the key from
the console. Keep the key in a secure place.
Note: If the displays and various indicators on
the console remain lit after the key is removed,
the console is in the ÒdemoÓ mode. Refer to
the instructions below and turn off the demo
mode.
When you are finished using the treadmill, move
the on/off switch near the power cord to the off
position.
THE INFORMATION MODE/DEMO MODE
The console features an information mode that keeps
track of the total number of hours that the treadmill has
been operated and the total number of miles that the
walking belt has moved. The information mode also
allows you to switch the console from miles per hour to
kilometers per hour.
To select the information mode, hold down the
START/STOP button while inserting the key into the
console. When the information mode is selected, the
following information will be shown:
The DISTANCE/LAPS
display will show the total
number of miles that the
walking belt has moved.
The TIME/MIN-MILE dis-
play will show the total num-
ber of hours the treadmill
has been used.
An ÒE,Ó for english miles, or
an ÒM,Ó for metric kilometers,
will appear in the SPEED
display. Press the SPEED
▲▲
button to change the unit of
measurement.
IMPORTANT: The CALS./
FAT CALS./PULSE display
should be blank. If a ÒdÓ ap-
pears in the display, the con-
sole is in the ÒdemoÓ mode.
This mode is intended to be
used only when a treadmill is
displayed in a store. When
the console is in the demo
mode, the power cord can be
plugged in, the key can be
removed from the console,
and the displays and indica-
tors on the console will auto-
matically light in a preset sequence, although the but-
tons on the console will not operate. If a ÒdÓ appears in
the CALS./FAT CALS./PULSE display when the in-
formation mode is selected, press the SPEED
▼▼
button so the CALS./FAT CALS./PULSE display is
blank.
To exit the information mode, remove the key from the
console.
10
9
8