Filter
Top Products
8
9
8
9. Attach an M6 x 10mm Screw (60) to the Seat
Post (11). Next, slide the Seat Carriage (19) onto the
Seat Post. Then, adjust the Seat Carriage to the
desired position and tighten the Seat Knob (31) into
the Seat Carriage.
See the inset drawing. Attach another M6 x 10mm
Screw (60) to the Seat Post (11).
8. Turn the Seat Post Knob (20) counterclockwise
several turns to loosen it. Next, pull the Seat Post
Knob outward, and insert the Seat Post (11) into the
Frame (1). Slide the Seat Post upward or down-
ward to the desired position, and release the Seat
Post Knob.
Move the Seat Post upward or down-
ward slightly to make sure that the Seat Post
Knob is engaged in one of the adjustment holes
in the Seat Post. Then, turn the Seat Post Knob
clockwise to tighten it.
11
20
1
60
19
11
60
11
31
7. Have a second person hold the Console (9) near the
Handlebar Post (6). Connect the console wire har-
ness to the Upper Wire Harness (55). Next, connect
the game wire on the Console to the Split Wire
Harness (25).
Attach the Console (9) to the Handlebar Post (6)
with four M4 x 16mm Screws (58). Be careful not
to pinch the wires in the Console.
9
25
55
58
6
Game
Wire
Console
Wire
Harness
7