Filter
Top Products
ASSEMBLY
Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not dispose
of the packing materials until assembly is completed. Assembly requires two adjustable wrenches
and a phillips screwdriver (not included).
1. Attach two Base Pads (57) to the bottom of the Base
(59) in the indicated locations. Note: One extra Base Pad
is included.
2. Firmly hold the left or right handrail as shown. Raise the
handrails until the Base (59) and the front Wheels (56)
are resting on the floor.
Remove the six Weight Rack Screws (106) and the
metal plate (not shown) from the right side of the Base
(59). Discard the metal plate.
Attach a Weight Rack (110) to the right side of the Base
(59) with the six Weight Rack Screws (106).
Attach the other Weight Rack (110) to the left side of the
Base (59) in the same manner (not shown).
3. Make sure that there is a Frame Guide (52) on the left
side of the Frame (23). If there is not, attach the Frame
Guide with two screws (100) as shown. Make sure that
the thick end of the Frame Guide is at the bottom.
4. Next, the treadmill should be raised to the storage posi-
tion. Hold the treadmill with your hands in the locations
shown at the right. To decrease the possibility of in-
jury, bend your legs and keep your back straight. As
you raise the treadmill, make sure to lift with your
legs rather than your back. Raise the treadmill about
halfway to the vertical position.
23
100
Thick end
52
3
4
5
1
Handrails
59
56
57
57
59
2
110
59
106
106
106