Filter
Top Products
23
HOW TO RESET THE FITNESS JOURNAL
1
. Select the user mode.
S
ee step 2 on page 14.
2. Reset the fitness journal.
To delete exercise information stored in the fitness
journal, first highlight the SETUP option using the
up and down Navigation buttons and then press
the Enter button. The setup menu will then appear
in the display.
Next, highlight the SETUP USER 1 or SETUP
USER 2 option and press the Enter button. The
user information menu will then appear in the dis-
play.
Then, highlight the RESET JOURNAL option and
press the Enter button.
A confirmation request will appear in the display.
To retain the information stored in the fitness jour
-
nal, highlight the CANCEL option and press the
Enter button. To delete the information stored in
the fitness journal, use the left and right Navigation
buttons to highlight the RESET JOURNAL option
and press the Enter button. After you have pressed
the Enter button, you will have several seconds to
cancel. If you press the Enter button while CAN-
CEL is highlighted, the information stored in the fit
-
ness journal will be retained. Then, the user infor-
mation menu will again appear in the display.
3. Exit the user mode.
Press the up and down Navigation buttons to high
-
light the SAVE AND EXIT option. Then, press the
Enter button.
THE INFORMATION MODE
T
he console features an information mode that keeps
track of treadmill usage information and allows you to
s
elect a unit of measurement for the console, turn on
or turn off the display demo mode, and set the contrast
of the display.
To select the information mode, hold down the Stop
button, insert the key into the console, and then release
the Stop button. When the information mode is se-
lected, the following information will appear in the dis-
play:
The display will show the total number of hours that the
treadmill has been operated and the total number of
miles or kilometers that the walking belt has moved.
In addition, the display will show the selected unit of
measurement. The word “English” will appear for miles
or the word “Metric” will appear for kilometers. To
change the unit of measurement, press the Speed in-
crease button. After a few seconds, the unit of mea-
surement will change.
Note: The console features a display demo mode, de-
signed to be used if the treadmill is displayed in a
store. While the demo mode is turned on, the console
will function normally when you plug in the power cord,
switch the reset/off circuit breaker to the reset position,
and insert the key into the console. However, when
you remove the key, the displays will remain lit, al-
though the buttons will not function. If the demo mode
is turned on, the word “ON” will appear in display while
the information mode is selected. To turn on or turn off
the demo mode, press the Speed decrease button.
The display will also show the contrast level of the dis-
play. Press the Incline increase and decrease buttons to
adjust the contrast.
To exit the information mode, remove the key from the
console.