Filter
Top Products
19
HOW TO USE AN EVENT TRAINING WORKOUT
1
. Insert the key into the console.
S
ee HOW TO TURN ON THE POWER on page
14.
2.
Personalize console settings if desired.
See HOW TO PERSONALIZE CONSOLE SET-
TINGS on page 14.
3
. Select an event training workout.
Press the Event Training Workouts button, Then,
press the left, right, up, and down Navigation but-
tons until the name of the desired workout (5K
Run, 10K Run, Half Marathon, or Boston
Marathon) and a track appear in the display. Note:
To return to a previous display, press the Back but-
ton. To return to the manual mode, press the Event
Training Workouts button.
4. Press the Start button to start the workout.
A moment after you press the Start button, the
walking belt will begin to move at 3 mph. Hold the
handrails and begin walking.
After a few minutes, the speed setting will flash in
the display and a series of tones will sound. The
speed of the walking belt will then increase to 4
mph.
After a few more minutes, the speed setting will
flash in the display and a series of tones will
sound. The speed of the walking belt will then in-
crease to 5 mph.
After another minute, the speed setting will flash in
the display and a series of tones will sound. The
speed of the walking belt will then increase to 6.5
mph.
To change the speed of the walking belt or the in-
cline of the treadmill at any time during the work-
o
ut, press the Speed or Incline buttons. Note: If
you press a Speed button, the speed setting will no
l
onger change automatically.
To stop the workout at any time, press the Stop
button. To restart the workout, press the Start but-
ton. The walking belt will begin to move at 1 mph.
Adjust the speed of the walking belt as desired by
pressing the Speed increase and decrease buttons
or one of the numbered speed buttons.
Note: When you have completed an event, your
total time and the words “Cool Down” will appear in
the display. If the speed of the walking belt was
greater than 5 mph when you completed the event,
the walking belt will then slow to 5 mph for one
minute. After one minute, the walking belt will slow
to 4 mph for a few minutes. The walking belt will
then slow to 3 mph for a few minutes. The walking
belt will then slow to a stop.
5. Select a display mode and follow your progress
with the display.
See step 6 on page 16.
During an event training workout, the display will
show the number of miles or kilometers still to be
walked or run.
6. Measure your heart rate if desired.
See step 7 on page 17.
7. When you are finished exercising, remove the
key from the console.
See step 8 on page 17.