Filter
Top Products
9
7
76
2
8
8. Tighten the three Feet (9) into the underside of
the Track (2).
Orient the Track (2) and the Track Cover (7) as
shown. Attach the Track Cover to the Track with
four M4 x 50mm Screws (76).
9
9
9
7
7. Note: For clarity, the Left and Right
Handlebars (22, 36) are not shown.
W
hile another person holds the Console (4)
near the Upright (3), connect the console wire to
t
he Wire Harness (73). Then, connect the con-
troller wire marked with an “R” tag to the Right
Extension Wire (83), which is also marked with
an “R” tag. Connect the other controller wire to
the Left Extension Wire (86). Insert the excess
wire downward into the Upright.
Tip: Avoid pinching the wires during this
step. Attach the Console (4) to the Upright (3)
with four M4 x 19mm Screws (75).
75
73
75
83
86
Controller Wires
Console Wire
4
3
Avoid pinching
the wires during
this step