Filter
Top Products
7
2. Orient the Left Upright (6) with the indicated holes
facing the direction shown. Attach the Crossbar
(
4) to the Left Upright with two M10 x 90mm
Button Screws (47) and two M10 Washers (45).
D
o not tighten the Button Screws yet.
Attach the Crossbar (4) to the Right Upright (7)
with two M10 x 90mm Button Screws (47) and
t
wo M10 Washers (45).
D
o not tighten the
Button Screws yet.
2
62
36
5
4
59
2
21
43
4. Orient the Crossbar Cap (21) as shown in the top
inset drawing. Press the Crossbar Cap onto the
Crossbar (4). Apply a small amount of the includ-
ed grease to an M10 x 80mm Button Screw (59).
Attach the Seat Frame (2) to the Support (5) with
the Button Screw and an M10 Nylon Locknut (43).
See the bottom inset drawing and identify the
Seat Frame Knob (62). Tighten the Seat Frame
Knob into the Seat Frame (2).
T
ighten the Backrest Knob (36) into the Seat
Frame (2).
3. Attach the Crossbar (4) to the Support (5) with an
M10 x 55mm Button Screw (50), two M10 x
80mm Button Screws (59), and two M10 Washers
(45).
Do not tighten the Button Screws Yet.
Attach the Base (1) to the Left and Right Uprights
(6, 7) with four M10 x 90mm Button Screws (47)
and four M10 Washers (45).
Tighten the Button Screws (47, 50, 59) used in
step 2 and this step.
Attach the Left and Right Upright Feet (15, 17) to
the Left and Right Uprights (6, 7) with four M4 x
12mm Self-tapping Screws (61).
4
1
50
61
17
59
45
7
45
45
47
47
47
15
61
5
6
4
45
45
4
7
47
47
Holes
6
3
4
7
Curl Knob (35)
Seat Frame Knob (62)
62
35
Front
Front