Filter
Top Products
12
ADJUSTING THE WEIGHT RESTS
To adjust the position of the Weight Rests (13),
remove the Pins (34) from the Left and Right Uprights
(6, 7). Raise or lower the Weight Rests to the desired
position. Reengage the Pins into the Weight Rests
and the Left and Right Uprights. Make sure that the
Weight Rests are at the same height.
7
6
34
34
13
1
3
11
10
38
2
Hole
5
62
REMOVING THE CURL BAR
To remove the Curl Bar (11), remove the Curl Pin (38)
from the Leg Lever (10).
STORING THE WEIGHT BENCH
Remove the Seat Frame Knob (62) from the Seat
Frame (2), and lift the weight bench to the position
shown. Insert the Seat Frame Knob into the indicated
hole in the Support (5) and the Seat Frame. Make
sure that the Seat Frame Knob is inserted through
the Seat Frame.