Filter
Top Products
10
1
1. Attach the Curl Bumper (39) to the Curl Bar (11)
with an M4 x 12mm Self-tapping Screw (61).
See the inset drawing and identify the Curl Pin
(
38).
A
ttach the Curl Bar (11) to the Leg Lever (10)
with the Curl Pin. Attach the Curl Pin to the Leg
Lever with an M4 x 12mm Self-tapping Screw (61).
12. See the inset drawing and identify the Pins
(34).
Slide a Weight Rest (13) onto the Right Upright
(7). Insert a Pin (34) through the Weight Rest and
the Right Upright. Next, attach the Pin to the
Weight Rest with an M4 x 12mm Self-tapping
Screw (61).
Repeat this step for the other side of the
weight bench.
13. Attach the Curl Pad (20) to the Curl Post (12) with
two M6 x 23mm Screws (53).
38
61
11
10
6
1
3
9
1
1
12
14. Make sure that all parts are properly tightened
before the weight bench is used. The use of the
remaining parts will be explained in ADJUST-
MENTS, beginning on the next page.
13
61
20
12
53
7
34
13
Pin (34)
Curl Pin (38)
Pin (34)
Curl Pin (38)
38
34
38
34