Filter
Top Products
17
THE INFORMATION MODE
The console features an information mode that keeps
t
rack of treadmill usage information and allows you to
select a unit of measurement for the console. You can
a
lso turn on and turn off the display demo mode.
To select the information mode, hold down the Stop
button while inserting the key into the console. When
the information mode is selected, the following infor-
mation will be shown:
The upper display will show
the total number of hours
that the treadmill has been
used.
The lower left display will show the total number of
miles or kilometers that the walking belt has moved.
An “M” for metric kilometers or an “E” for English miles
will appear in the lower right display. Press the Speed
increase button to change the unit of measurement, if
d
esired.
T
he console features a display demo mode, designed
to be used if the treadmill is displayed in a store. While
the demo mode is turned on, the console will function
normally when you plug in the power cord, press the
power switch into the reset position, and insert the key
into the console. However, when you remove the key,
the displays will remain lit, although the buttons will not
function. If the demo mode is turned on, a “d” will ap-
pear in the lower right display while the information
mode is selected. To turn on or turn off the demo
mode, press the Speed decrease button.
To exit the information mode, remove the key from the
console.