Filter
Top Products
11. Lower the Uprights (31, 36) as shown.
See the inset drawing. Position the Uprights
(31, 36) so that the treadmill Frame (74) is cen-
tered between the Uprights.
Firmly tighten the 3/8" x 2 1/2" Bolts (32) and
then the 3/8" x 2 1/4" Bolts (5) on each side of
the treadmill. Do not overtighten the 3/8" x
2 1/2" Bolts.
36
31, 36
32
74
74
31
View from Above
Side View
11
5
10
22
10. Insert the wires into the Console Base (26) as
you set the Console Base on the Handrails (18).
B
e careful not to pinch the wires. Next, thread
two 1/4" x 1/2" Bolts (22) with two 1/4" Star
Washers (21) into the Handrails and the
Console Base; do not tighten the Bolts yet.
Attach the Console Base (26) to the Handrails
(
18) with four #8 x 3/4" Screws (2). Then,
tighten the two 1/4" x 1/2" Bolts (22).
See step 8. Remove the plastic tie from the right
Handrail (18).
2
22
21
21
2
1
8
18
10
2
6
Front View