ProForm Lwufp Treadmill User Manual


  Open as PDF
of 32
 
18
HOW TO USE A PERFORMANCE WORKOUT
1. Insert the key into the console.
See HOW TO TURN ON THE POWER on page 15.
2. Select a performance workout.
To select a performance workout, press the
Performance Workouts button repeatedly until the
desired workout appears in the display.
When you select a performance workout, the maxi-
muminclineleveloftheworkoutwillashinthe
lower left display, the maximum speed setting will
ashinthelowerrightdisplay,andthenthework-
out duration will appear in the upper display. In ad-
dition,aproleofthespeedsettingsoftheworkout
will scroll across the display.
3. Enter your weight if desired.
For the most accurate calorie count, enter your
weight into the console by pressing the Wt. in-
crease and decrease buttons repeatedly. Note:
Once you have entered your weight, your weight
will be saved in memory.
4. Select the duration of the workout if desired.
If you have selected a performance workout, you
can set the duration of the workout to a time be-
tween 15 and 45 minutes, in increments of 5 min-
utes. To set the duration of the workout press the
Time increase or decrease button until the desired
time is selected. The new workout settings will ap-
pear in the displays.
5. Start the workout.
Press the Start button or the Speed increase button
to start the workout. A moment after you press the
button, the treadmill will automatically adjust to the
rstspeedandinclinesettingsoftheworkout.Hold
the handrails and begin walking.
Each workout is divided into 30 one-minute seg-
ments, unless you have changed the duration of
the workout (see step 4). One speed setting and
one incline setting are programmed for each seg-
ment. Note: The same speed setting and/or incline
setting may be programmed for consecutive
segments.
During the workout, the
prolewillshowyour
progress.Theashing
segmentoftheprole
represents the current
segment of the workout.
Theheightoftheashing
segment indicates the
speed setting for the current segment. At the end of
each segment, a series of tones will sound. If a dif-
ferent speed and/or incline setting is programmed
for the next segment, the speed and/or incline
settingwillashinthedisplaytoalertyouandthe
treadmill will automatically adjust to the new speed
and/or incline setting.
The workout will continue in this way until the last
segmentoftheproleashesinthedisplayandthe
last segment ends. The walking belt will then slow
to a stop.
If the speed or incline setting is too high or too low
at any time during the workout, you can manu-
ally override the setting by pressing the Speed or
Incline buttons; however, when the next segment
of the workout begins, the treadmill will auto-
matically adjust to the speed and incline set-
tings for the next segment.
To stop the workout at any time, press the Stop
button. To restart the workout, press the Start but-
ton or the Speed increase button. The walking belt
will begin to move at 1 mph. When the next seg-
ment of the workout begins, the treadmill will auto-
matically adjust to the speed and incline settings
for the next segment.
6. Follow your progress with the displays.
See step 6 on page 16.
7. Measure your heart rate if desired.
See step 7 on page 16.
8. When you are nished exercising, remove the
key from the console.
See step 8 on page 16.
Current Segment
 previous next