ProForm Lwufp Treadmill User Manual


  Open as PDF
of 32
 
17
HOW TO USE A CALORIE WORKOUT
1. Insert the key into the console.
See HOW TO TURN ON THE POWER on page 15.
2. Select a calorie workout.
To select a calorie workout, press the Calorie
Workouts button repeatedly until the desired work-
out appears in the display.
When you select a calorie workout, the incline level
oftheworkoutwillashinthelowerleftdisplay,the
speedsettingwillashinthelowerrightdisplay,
and then the workout duration will appear in the
upperdisplay.Inaddition,aproleofthespeedset-
tings of the workout will scroll across the display.
3. Enter your weight if desired.
For the most accurate calorie count, enter your
weight into the console by pressing the Wt. in-
crease and decrease buttons repeatedly. Note:
Once you have entered your weight, your weight
will be saved in memory.
4. Start the workout.
Press the Start button or the Speed increase button
to start the workout. A moment after you press the
button, the treadmill will automatically adjust to the
rstspeedandinclinesettingsoftheworkout.Hold
the handrails and begin walking.
Each workout is divided into one-minute segments.
One speed setting and one incline setting are
programmed for each segment. Note: The same
speed setting and/or incline setting may be pro-
grammed for consecutive segments.
Duringtheworkout,theprolewillshowyourprog-
ress.Theashingsegmentoftheprolerepresents
the current segment of the workout. The height of
theashingsegmentindicatesthespeedsetting
for the current segment. At the end of each seg-
ment, a series of tones
will sound. If a different
speed and/or incline set-
ting is programmed for
the next segment, the
speed and/or incline set-
tingwillashinthedis-
play to alert you and the
treadmill will automatically adjust to the new speed
and/or incline setting.
The workout will continue in this way until the last
segmentoftheproleashesinthedisplayandthe
last segment ends. The walking belt will then slow
to a stop.
If the speed or incline setting is too high or too low
at any time during the workout, you can manu-
ally override the setting by pressing the Speed or
Incline buttons; however, when the next segment
of the workout begins, the treadmill will auto-
matically adjust to the speed and incline set-
tings for the next segment.
To stop the workout at any time, press the Stop
button. To restart the workout, press the Start but-
ton or the Speed increase button. The walking belt
will begin to move at 1 mph. When the next seg-
ment of the workout begins, the treadmill will auto-
matically adjust to the speed and incline settings
for the next segment.
5. Follow your progress with the displays.
See step 6 on page 16.
6. Measure your heart rate if desired.
See step 7 on page 16.
7. When you are nished exercising, remove the
key from the console.
See step 8 on page 16.
Current Segment
 previous next