Filter
Top Products
19
THE INFORMATION MODE
The console features a userʼs mode that allows you to
c
hoose an audio setting for your iFit workouts. The
userʼs mode also keeps track of the total number of
m
iles that the walking belt has moved and the total
number of hours that the treadmill has been operated.
You can also select miles or kilometers as the unit of
measurement and turn on and turn off the demo mode.
To select the information mode, hold down the Stop
button while inserting the key into the console and then
release the Stop button. When the information mode is
selected, the following information will be shown:
You can select an audio setting for your personal
trainer if desired. When you use an iFit card, a per-
sonal trainer will guide you through your workouts. If
you select the ON setting, the personal trainer will give
you detailed instructions. If you select the OFF setting,
your personal trainer will simply guide you through
your iFit workouts. To change the audio setting, press
the Incline decrease button.
The display will show the total number of hours the
treadmill has been used. The display will also show the
total number of miles (or kilometers) that the walking
belt has moved.
The word ENGLISH for miles or METRIC for kilome-
ters will appear in the display. Press the Speed in-
crease button to change the unit of measurement if de-
sired.
Note: The console features a display demo mode, de-
signed to be used if the treadmill is displayed in a
store. While the demo mode is turned on, the console
will function normally when you plug in the power cord,
switch the reset/off circuit breaker to the reset position,
and insert the key into the console. However, when
you remove the key, the displays will remain lit, al-
though the buttons will not function. If the demo mode
i
s turned on, the word ON will appear in the display
while the information mode is selected. To turn on or
o
ff the demo mode, press the Speed decrease button.
To exit the information mode, remove the key from the
console.
HOW TO USE THE STEREO SOUND SYSTEM
This treadmill has been designed specifically to work
with iPod and has been certified by the developer to
meet Apple performance standards. To play music or
audio books through the consoleʼs stereo speakers,
you must connect your iPod, MP3 player, CD player,
or other personal audio player to the console through
the audio jack or through the compatible music port for
iPod. The music port will charge your iPod while you
use it.
To use the audio wire, locate the audio wire and plug it
into the audio jack near the speakers. Then plug the
audio wire into a jack on your MP3 player, CD player,
or other personal audio player. Make sure that the
audio wire is fully plugged in.
To use the compatible music port for iPod, you need
an iFit universal iPod connector (not included). To pur-
chase an iFit universal iPod connector, please call
the telephone number on the front cover of this
manual. Plug one end into the music port near the
speakers and the other end into your iPod. Make sure
that the iFit universal iPod connector is fully
plugged in.
Next, press the Play button on your iPod, MP3 player,
CD player, or other personal audio player. Adjust the
volume on your personal audio player or press the
Volume increase and decrease buttons on the con-
sole.
If you are using a personal CD player and the CD
skips, set the CD player on the floor or another flat sur-
face and not on the console.