Filter
Top Products
11
10. Attach the console assembly with six 5/16" x 1"
Bolts (6) and four 5/16" Star Washers (13) (only
one side is shown).
See steps 4 and 6. Tighten the 3/8" x 4" Bolts
(9).
Console
Assembly
10
6
13
13
6
9. Have a second person hold the console assem-
bly near the Right Upright (80) and the Left
Upright (not shown). Connect the Upright Wire
(
79) to the console wire. See the inset draw-
ing. The connectors should slide together
e
asily and snap into place. If they do not, turn
one connector and try again. IF THE CONNEC-
TORS ARE NOT CONNECTED PROPERLY,
THE CONSOLE MAY BE DAMAGED WHEN
THE POWER IS TURNED ON. Then, remove
the wire tie from the Upright Wire.
Set the console assembly on the Right Upright
(80) and the Left Upright (not shown). Be care-
ful not to pinch the wires.
C
onsole
Assembly
Console
Wire
Wire
Tie
79
80
79
Console
Wire
9