Filter
Top Products
ASSEMBLY
M
ake sure that the power cord is unplugged. Assembly requires two persons.
S
et the treadmill in a cleared
area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Note:
The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small
amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal con-
dition and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off the
lubricant with a soft cloth and a mild, non-abrasive cleaner.
Assembly requires the included allen wrenches and your own phillips screwdriver
and wire cutters .
Use the drawings below to identify the assembly hardware. The number in parentheses below each drawing is
the key number of the part, from the PART LIST on pages 26 and 27. The number after the parentheses shows
the quantity needed for assembly. Note: If a part is not in the parts bag, check to see if it is preattached to one of
the parts to be assembled.
If a part is missing, call toll-free 1-888-533-1333.
1. With the help of a second person, raise the Uprights (97)
to the vertical position.
Insert a Handrail Extension (105) into the post on the left
Upright (97), and align the small holes in the sides of the
Handrail Extension with the small holes in the sides of
the post. Make sure that the Handrail Extension is
oriented so the slot is on top. Tighten two Extension
Screws (80) into the sides of the post; make sure that
the Screws are
not directly opposite each other.
Next, identify a Left Bottom Handgrip (43), which has a
large hole for the latch assembly. Hold the Left Bottom
Handgrip against the Handrail Extension (105) and the
post, and tighten two 1” Screws (88) and one Screw (95)
down into the Left Bottom Handgrip as shown.
Attach the Left Top Handgrip (81) with three Screws (95)
inserted through the Left Bottom Handgrip (43).
Repeat this step on the right side of the treadmill.
80
80
97
88
Hole
1
95
Slot
95
105
43
81
Nut (20)–4
Base Pad Screw (40)–4
Wheel Bolt (90)–2
3” Bolt (86)–2
Screw (95)–8
Extension Screw (80)–4
Washer (71)–4
1 3/4” Bolt (76)–2
1” Screw (88)–4
5