Filter
Top Products
8
3. Identify the Left Upright (89), which is either
marked "Left" or "L." Have a second person hold
the Left Upright near the Base (94).
See the inset drawing. Tie the wire tie in the
Left Upright (89) securely around the end of the
Upright Wire (81). Then, pull the other end of the
wire tie until the Upright Wire is routed through
the Left Upright.
81
3
81
89
Wire
Tie
Wire
Tie
89
94
81
4. Hold the Left Upright (89) against the Base
(94). Be careful not to pinch the Upright Wire
(81). Insert two 3/8" x 1 1/4" Screws (8) with
two 3/8" Star Washers (13) and two 3/8" x
2 3/4" Screws (7) into the Left Upright.
Partially tighten the 3/8" x 2 3/4" Screws (7) and
the 3/8" x 1 1/4" Screws (8) until the heads of
the Screws touch the Left Upright (89); do not
fully tighten the Screws yet.
Attach the Right Upright (not shown) in the
same way. Note: There are no wires on the
right side.
89
94
4
81
8
7
13
13