Filter
Top Products
7
1
. Make sure that the power cord is unplugged.
W
ith the help of a second person, carefully tip
the treadmill onto its left side. Partially fold the
Frame (57) so that the treadmill is more stable;
do not fully fold the Frame yet.
Cut the shipping tie securing the Wire Harness
(92) to the Base (99). Next, locate a tie in the in-
dicated hole in the Base, and use the tie to pull
the Wire Harness out of the hole.
9
9
57
1
92
Hole
2. See the inset drawing. Cut the plastic tie near
the Wire Harness (92).
Attach two Base Feet (93) to the Base (99) in
the locations shown with two #8 x 1" Tek
Screws (2) and two Base Foot Spacers (94).
Attach the other two Base Feet (93) with only
two #8 x 1" Tek Screws (2).
99
2
93
2
93
2
2
93
2
93
94
94
Cut
92
Plastic Tie