Filter
Top Products
17
THE INFORMATION MODE/DEMO MODE
T
he console features an information mode that keeps
track of treadmill usage information and allows you to
s
elect a unit of measurement for the console.
To select the information mode, insert the key into the
console while holding down the Stop button, and then
release the Stop button. When the information mode is
selected, the following information will be shown:
An “E” (for English) or an “M”
(for metric) will appear in the
lower right display. Press the
Speed increase button to
change the unit of measure-
ment, if desired.
The upper display will show the total number of hours
that the treadmill has been used.
The lower left display will
show the total number of
k
ilometers (or miles) that the
walking belt has moved.
IMPORTANT: If a “d” appears in the lower right display,
the console is in the “demo” mode. This mode is in-
tended to be used only when a treadmill is displayed in
a store. When the console is in the demo mode, the
power cord can be plugged in, the key can be removed
from the console, and the display will remain lit, al-
though the buttons will not operate. If a “d” appears
when the information mode is selected, press the
Speed decrease button so the “d” disappears.
To exit the information mode, remove the key from the
console.