Filter
Top Products
Assembling the AMT 25
2. Reposition the adjustable feet as needed.
If you want to … Then turn the adjustable feet …
Raise the front end of the AMT Counterclockwise
Lower the front end of the AMT Clockwise
Figure 7: Location of adjustable feet
3. When you are finished positioning the adjustable feet,
place the unit on the floor. Try rocking it again, as
described in step 1, to verify that it is level.
4. To install the rear pedestal, align it over the rear
crosspiece and press it gently into place.
Figure 8: Rear pedestal placement