Filter
Top Products
Ab-X100 Assembly Guide
page 5
1
Preparations
Preparations
The Ab-X100 parts are inspected before shipment.
Each unit contains several pieces that require
assembly. You may find it helpful to ask for assistance
during the assembly process.
Unpacking the Equipment
When you open a box, carefully unpack the pieces and
lay them on the floor near the location where you plan
to use them.
CAUTION: Be careful when you remove the
packaging material with a utility knife. Do not cut
the upholstery or scratch the paint.
If any items are missing, contact the dealer from whom
you purchased the unit. For more information, refer to
Obtaining Service
.
Required Tools
Tools that you need to obtain before assembling the
unit include:
❏ Measuring tape
❏ Rubber mallet
❏ Wire tie cutter or utility knife
Installation Requirements
Follow these installation requirements when
assembling the unit:
• Review the
Important Safety Instructions
.
• Assemble the unit where it will be used.
• Install components in the sequence shown.
• Insert all fasteners in the same direction. For
aesthetic purposes, insert all the fasteners in the
same direction unless specified (in text or
illustrations) to do otherwise.
• Leave room for adjustments. Tighten the
fasteners to keep the unit stable, but leave room
for adjustments.