Filter
Top Products
D 76 E 77
E. CONNECTION TO
COMPUTER
There is two-way communication between a wrist
receiver and a computer. The Polar Precision
Performance software offers an easy way to analyze
training data. A training log makes it possible to
plan future training. Wrist receiver settings can be
uploaded from the software or manually entered.
After preparing your settings you can upload
options lock to ensure that your settings will not
change. You must deactivate the options lock from
the “user features” of your software.
Downloading Training Data to a Computer
*Optional Polar Cadence Sensor or Polar Power Output Sensor required.
For IR communication you need an IrDA port and Windows® 98
operating system or later in your computer.
If you do not have an IrDA port in your computer you need one of the
following:
A) an optional Polar IR Interface for RS 232 port and Windows® 95 operating
system or later in your computer
Returning to Your Previous Maximum Value
Start with the display showing Max Spd, Max Cad*, Max Alt or Max Pwr* in
the records file.
1. Press and hold the signal/light button to start returning to the previous
value. Return OLd appears and the value starts to flash.
2. You can still cancel the reset by pressing the stop button. If you are sure
you want to return to the previous value, press OK.
3. Press the stop button to exit the display.
Or, if you want to start resetting your maximum value to zero, press and
hold the signal/light button. Reset VALUE starts to flash. Once your have
reset the value you cannot retrieve it.
4. You can still cancel the reset by pressing the stop button. If you are sure
you want to return to the previous value, press OK.
5. Press and hold the stop button to return to the Time of Day display.
S720i manual USA A .pm6 12/2/02, 10:1176-77