Filter
Top Products
B
43B 42
24h Time mode: day
- month - year
Setting Time of Day
If you start from the Time of Day display, repeat steps 1-4.
5. Scroll up or down until TIME1/ TIME2 is displayed.
6. Press OK to start setting the time of day.
7. Time is flashing. Scroll up or down to select time 1 or time 2. Press OK.
8. 12h/ 24h starts to flash. Scroll up or down to select 12h or 24h
time mode. Press OK. 24h: skip step 9.
9. AM/ PM starts to flash. Scroll up or down to select AM or PM. Press OK.
10. The hours start to flash. Scroll up or down to adjust the hours. Press OK.
11. The minutes start to flash. Scroll up or down to adjust the minutes.
Press OK.
Setting Date
If you start from the Time of Day display, repeat steps 1-4.
5. Scroll up or down until DATE is displayed.
6. Press OK to start adjusting the date.
7. Month appears. Scroll up or down to select the
desired value. Press OK.
8. Day appears. Scroll up or down to select the
desired value. Press OK.
9. Year digits start to flash. Scroll up or down to select the year. Press OK.
Turning Reminders on/off
If you start from the Time of Day display, repeat steps 1-4.
5. Scroll up or down until REMIND is displayed.
6. Press OK to start setting the reminders.
7. Scroll up or down until desired reminder is displayed. The number of the
reminder is displayed in the corner of the display.
8. Press OK. On/OFF starts to flash.
9. Scroll up or down to set the reminder on or off. Press OK.
You can upload 7 reminders, each including time and name, to your wrist
receiver from Polar Precision Performance software.
The reminder sounds an alarm only when time of day is displayed. When
the reminder alarm comes on, it will sound for 15 seconds or you can turn it
off by pressing any of the buttons except the signal/light button. Erase the
reminder text by pressing any of the buttons except the signal/light button.
To continue your settings, press the stop button. To return to the Time of
Day display, press and hold the stop button.
S720i manual USA A .pm6 12/2/02, 10:1042-43