Planar PL170 Bicycle User Manual


 
Precautions
Sit at least 18"(45 cm) away from the screen when in use.
Do not press on the LCD panel as it is very fragile.
Do not touch the LCD panel with your bare hands. Oil from your skin is difficult to
remove and may damage the screen.
Do not expose the LCD monitor directly under sunlight or other heat sources. When in
use, the LCD screen should be facing away from light sources to reduce glare.
It is important to choose a well-ventilated area to place your LCD monitor for adequate
ventilation. Do not place anything on top of the LCD monitor.
Ensure the areas around the LCD monitor are clean and moisture-free.
Do not place heavy objects on the power cord, adapter, or signal cables.
If smoke, abnormal noise, or strange odor occurs, immediately turn the LCD monitor off
and call your dealer. Do not continue using the LCD monitor.
Do not remove the rear cover by yourself. The display unit contains high-voltage parts
and may expose you to the electric shock. Contact your local dealer for the service if
needed.
When moving, always handle your LCD monitor with care.
Do not forcefully press down the screen in case of damages to the monitor. Please refer
to P.5 to adjust the monitor.
Cleaning the TFT LCD Monitor
Wipe screen gently with a clean lens brush of camel hair, or a soft, clean, lint-free cloth. It
can remove dust and other particles which will not scratch the LCD panel.
If it is still not clean, blow and wipe gently with a soft, clean, lint-free cloth.
Never pour or spray any liquid onto the LCD monitor.
Do not apply pressure to the LCD panel.
4