During the tanning or relax session, you can enjoy your favourite fragrance. You can choose from three different fragrances.
The scent granules have been specially developed for use in this appliance. Do not use other granules.
1 Pull the cap off the cartridge while you apply pressure on the small pressing points. (Fig. 25)
2 Open the sachet at the small opening at the top.
3 Fill the cartridge with the content of one whole sachet of scent granules.
4 Put the cap back onto the cartridge (‘click’).
1 Place the cartridge in the holder. It only ts in one way and locks in place with a click. (Fig. 26)
2 To remove the cartridge, place your thumb and index nger on the sides of the cartridge. Press on the disc to remove the cartridge
from the holder. (Fig. 27)
1 Turn the cartridge to set the fragrance level. (Fig. 28)
Turn the cartridge in the direction of the large ower symbol to increase the fragrance level. Turn it in the opposite direction to reduce the
fragrance level.
2 When you store the appliance or do not want it to emit a fragrance, turn the cartridge away from the large ower symbol as far as it
goes. (Fig. 29)
The holes are no longer visible.
3 Replace the granules when the cartridge no longer emits any fragrance. Replacement packages with 3 sachets of scent granules are
available under type number HB080.
Please bear in mind that the fragrance level depends on a number of factors, such as the following:
Habituation may cause fragrances to be perceived less or not at all, but this is normal.
When you lie on your belly, the fragrance is less noticeable than when you lie on your back.
Airows in the room where you use the appliance may also affect the fragrance level.
Your personal condition may also inuence the degree to which you perceive the fragrance.
During the tanning or relax session, you can choose an ambient sound that appeals to you and that helps you relax optimally.There are four
different ambient sounds to choose from.
You can also listen to your own favourite music on the built-in radio (HB947 only). You can also connect your own audio player (e.g. CD/MP3 or
radio) to the INNERGIZE.
1 Press the sound selection button one or more times to select the preferred sound.
Seashore sound (Fig. 30)
Forest sound (Fig. 31)
Oriental garden sound (Fig. 32)
City sound (Fig. 33)
Note: The selected sound symbol turns yellow.
Tip:To listen to the sounds undisturbed by other background noises, you can use the in-ear headphones that come with the appliance.
Note:The ambient sounds are meant to be background sounds.This means that they should not be too dominant. The relaxing effect is optimal when
the sounds are just audible. Avoid high sound levels,
1 To select the radio, press the sound selection button until the FM symbol turns yellow. (Fig. 34)
2 To select your favourite radio station, turn the radio tuning dial (Fig. 35).
To connect your own audio player (e.g. CD/MP3 or radio) to the appliance, use the cable with 2 jack plugs supplied with the appliance.
1 Insert one jack plug into the AUX socket on the right side of the control panel.
2 Insert the other jack plug into the headphone socket of your audio player (e.g. CD, MP3 or radio).
3 Press the sound selection button until the AUX symbol lights up. (Fig. 36)
The Philips Stereo Active Speakers amplify the signal according to your preference.
1 Turn the volume dial to adjust the volume. (Fig. 37)
Cleaning
Always unplug the appliance and let it cool down before you start to clean it.
Never use scouring pads, abrasive cleaning agents or aggressive liquids such as petrol or acetone to clean the appliance.
Do not let any water run into the appliance.
1 Clean the outside of the appliance with a damp cloth.
2 Clean the outside of the UV lters with a soft cloth sprinkled with some methylated spirits.
,
,
-
-
-
-
,
,
,
,
ENGLISH8