ParaBody 808106 Home Gym User Manual


  Open as PDF
of 5
 
STEP 2:
Clean the surfaces of the PLATES on the BAR SUPPORT
(3) with rubbing alcohol and allow to dry.
Remove backing from the two RUBBER STRIPS (21) and
attach them to the PLATES of the BAR SUPPORT (3)
shown in FIGURE 2.
Assemble the 3/8" SPRING PIN (11) into the SPRINGPIN
BARREL on the BENCH FRAME (1) and tighten nut
securely. See FIGURE 2.
Snap two 2" SQ INSERT GUIDES (13) into the ends of the
BENCH FRAME (1) as shownin FIGURE
FIGURE 2
STEP 3:
SECURELY assemble the ARM PAD (5) to the ARM
PAD SUPPORT (2)using four 3/8 X 1" BOLTS (10)
four 3/8" WASHERS (15) as shownin FIGURE
FIGURE 3
 previous