Filter
Top Products
STEP 4:
• Attach two 1/4 X 2 X 16-1/2” PLATES (4) to the bushing on the SWIVEL PLATE (2) using one 1/2 X 6-1/2”
BOLT (22) and one 1/2” NYLOCK NUT (26). See FIGURE 4.
FIGURE 4
• Slide two HINGE TABS (13) over the shaft on the WOLFF SLEEVE (7) as shown in FIGURE 4.
STEP 5:
• Attach the LEFT (5) & RIGHT (6) BACK PAD ANGLES to the 1/4 X 2 X 16-1/2” PLATES (4) using two
1/2 X 1-1/4” BOLTS (20), two 1/2” FLAT WASHERS (24), and two 1/2” NYLOCK NUTS (26).
FIGURE 5
• Slide the LEFT (5) & RIGHT (6) BACK PAD ANGLES over the shaft on the WOLFF SLEEVE (7) as shown
in FIGURE 5.
4
7
13
26
4
1/2 X 6-1/2” 22
3
26
6
5
24
4
1/2 X 1-1/4” 20
4
20 1/2 X 1-1/4”
24
7
7
2